Fisher Paykel Refrigerator Error Code Fault Code 42
If your refrigerator displays Fault Code 42, it points to a problem with the ice maker fill tube. This error is critical to address promptly, as it directly impacts the ice-making functionality of your appliance.
Possible Causes:
- Frozen Fill Tube: One common cause of this error is a frozen fill tube. Over time, the water in the tube may freeze, obstructing the flow of water to the ice maker.
- Faulty Water Inlet Valve: A malfunctioning water inlet valve can impede the water supply to the ice maker, triggering Fault Code 42.
- Blocked or Kinked Water Line: An obstruction or kink in the water line that supplies water to the ice maker can also lead to this error.
Troubleshooting Steps:
1. Thawing the Fill Tube:
- Begin by unplugging the refrigerator to ensure safety.
- Identify the ice maker fill tube, typically located at the back of the refrigerator.
- Gently thaw the fill tube using a hairdryer or by letting the refrigerator sit unplugged for some time.
2. Checking the Water Inlet Valve:
- Locate the water inlet valve, usually found behind the refrigerator.
- Inspect for any visible damage or signs of malfunction.
- If the valve appears faulty, consider replacing it with a compatible part.
3. Inspecting the Water Line:
- Trace the water line from the refrigerator’s water supply to the ice maker.
- Look for any obstructions, kinks, or damage.
- Clear any blockages and straighten out kinks as needed.
4. Testing for Continuity:
- Use a multimeter to check the continuity of the water inlet valve.
- If there is no continuity, it indicates a malfunction, and the valve may need replacement.
5. Professional Assistance:
- If the issue persists or if you are uncomfortable performing these steps, it’s advisable to seek professional assistance. A certified technician can diagnose and fix the problem efficiently.
Note: Always refer to your refrigerator’s user manual for model-specific details and instructions. Additionally, exercise caution when troubleshooting electrical components and, if unsure, consult with a qualified technician for assistance.